Machine Models (Bottle Flake Based)
| Model | Screw Dia. | Venting Type | Vent Ports | Typical Feedstock | Application Focus |
| XP-PET90 | 75–90 mm | Non-Vented | — | Clean, washed bottle flakes | Stable granule for blending use |
| XP-PET120 | 100–120 mm | Vented | Single Vent | Washed PET bottle flakes | Consistent melt & filtration |
| XP-PET150 | 130–150 mm | Vented | Double Vent | Post-consumer bottle flakes | Higher throughput, process stability |
| XP-PET180 | 160–180 mm | Vented | Double / Triple Vent* | Large-volume bottle flakes | Industrial granule production |
Note: Multiple vent ports are applied only in high-throughput PET recycling systems or where feedstock variability demands additional degassing capacity. Venting supports process stability but does not replace proper drying and melt filtration.
CAN PET BE RECYCLED WITHOUT VENTING?
Short answer: YES — under defined conditions.
Venting improves safety margin, but does not replace drying.
END USE OF RECYCLED PET GRANULES (NON-FIBER)
PET granules produced through these systems are typically used as:
XTRUSTAR PET recycling systems for granule production are configured based on feedstock control level, drying strategy, and intended end use, with vented and non-vented architectures applied where technically appropriate.
XTRUSTAR PET recycling machines are designed for producing recycled PET granules from washed bottle flakes. The systems focus on controlled melting, stable filtration, and consistent pellet quality suitable for downstream blending and secondary processing. Machine configuration is selected primarily on throughput requirement and melt stability rather than stage count alone.
For further technical details, contact XTRUSTAR.
Phone: +91-9227004488, Email: xtrustar.em@gmail.com
You are on page 11 of this website.